|
| |  | Charge Controlers | Home » » GenTran 3028K 30 Amp 8-Circuit Transfer Switch/Power Inlet Box/Power Cord Kit For Up To 7,500-Watt Generators | | | | | | | Description: | | The GenTran 30 Amp 8-circuit transfer switch for up to 7,500-watt generators includes everything you'll need to install a generator transfer switch for safe, convenient portable generator hookup. This kit includes a prewired 8-circuit transfer switch, a 25-foot power cord and a power inlet box enclosure. Power up your essential circuits using a 5,000-watt generator (continuous watts) during a power outage or emergency. It accommodates 8-to-10 household circuits like your furnace blower (gas only), refrigerator and kitchen circuits, well pump, lights, and television. If your needs change, your installer can easily expand this transfer switch to up to ten circuits just by adding more circuit breakers. The enclosure can be surface mounted indoors, and allows hardwired or plug-in generator connections. Because it was designed with off-the-shelf circuit breakers you don't have to search high and low for replacements, and your installer can reconfigure the breaker combinations to suit your family's needs. This transfer switch has a L14-30 male power inlet and a dual watt meters to help you balance generator loads to prolong generator life. The kit comes with two 15 Amp 1-pole breakers, two 20 Amp 1-pole breakers, one 2-pole 20 Amp breaker, and one 2-pole 30 Amp breaker. A 60 Amp 2-pole main breaker is required in existing load center (not included). This kit comes with a 2-year limited warranty. | | | Features: | |
• 30 Amp 8-circuit transfer switch for use with up to 7,500-watt generator
• Powers up essential circuits using 5,000-watt generator during a power outage or emergency
• Accommodates 8 to 10 household circuits
• Includes pre-wired 6-circuit transfer switch, 25-foot power cord and power inlet box enclosure
• 2-year limited warranty
| | | Product Details: | | | Product Length:
| 27.0 inches | | Product Width:
| 5.0 inches | | Product Height:
| 16.0 inches | | Package Length:
| 19.3 inches | | Package Width:
| 17.1 inches | | Package Height:
| 11.1 inches | | Package Weight:
| 24.0 pounds | | Average Customer Rating:
|  based on 22 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
Write an online review and share your thoughts with other customers.
 perfectFeb 09, 2010
everything (except for a breaker for the main box) in this one package. So far this thing has done exactly what i expected.....my power not gone out one time since purchasing, so I've never actually used it!!!!! Exactly what I was hoping for when i bought it!
 Great KitJan 31, 2010
Unit was very easy to install, took longer to plan which circuits I wanted to power. As mentioned by other reviews, I did have to switch out some of single breakers for dual pole to get to the 10 circuits which also required some additional wire.
Bought it in combo with the Generac GP 7000E. The manual transfer switch kit came with 25ft generator cord, plugs and everything I needed to connect to my load center. I can run 10 circuits and almost everything in my house except the AC. Ran it for about 8 hours with partial load on one tank of gas.
Generac 5626 GP Series GP7000E 8750-Watt 410cc OHV Portable Gas Powered Generator with Electric Start (Non-CARB Compliant)
GenTran 3028K 30 Amp 8-Circuit Transfer Switch/Power Inlet Box/Power Cord Kit For Up To 7,500-Watt Generators
Circuit Transfer SwitchOct 16, 2009
Product arrived in a timely fashion and was relatively easy to install based on the detailed instructions. Modified box and went with all 20 amp breakers which required purchasing these which are available at every hardware store/Home Depot & Lowe's. Installation time about three hours and works as advertized and is a quality product.
great for its purposeSep 27, 2009
Put a new circuit breaker box on the house and thought this would be a great complement for the electrical. The unit was very easy to install and quality looks to be very good. Now the power can go out and I have an easy back up method.
Great set-upAug 09, 2009
Took me about one full day's worth of labor after assembling all the necessary tools, a 60A breaker and some pvc conduit (I didn't use the included flex conduit), but the install went smooth and it works great! It comes with ALMOST everything you'll need. After shopping around on line it proved to be a great product for the $$$ and functions (so far) perfectly. Just do NOT try this project unless you are a qualified electrician or VERY well versed in electrical wiring and know what a 240V shock feels like!
| | |
|
